Vyberte místo pro doručení

Výběr stránky země/oblasti může mít vliv na různé faktory, jako jsou cena, možnosti dopravy a dostupnost produktu.

myigus

Nákupní košík

(0)

Moje kontaktní osoba

Hennlich s.r.o.

Račianska 188

831 53 Bratislava 34

+421 2 50202506

+421 2 50202520

Odeslat zprávu

Hennlich s.r.o.

Košťany nad Turcom 543

SK-038 41 Košťany nad Turcom

Odeslat zprávu

Zobrazit všechny kontakty

SK(CS)

drylin® cleanroom compatibility, ESD compatibility and RoHS

The tested drylin® guides demonstrate a clear suitability for cleanrooms. The differentiation between the various cleanroom classes is only dependent on load and speed of the application. The combination iglidur® J against anodised and hard anodised aluminium has "Level 1" in the ESD compatibility according to SEMI E78-0998 (best rating).

All drylin® linear guide systems are designed for dry operation and have also been tested in this condition. No oils or fats were used as additional lubricants.

IPA qualification certificate

The guidance systems specified in the certificate comply with RoHS requirements and Directive 2011/65/EU.

The following drylin® guides from igus® were tested: N40, W10, T25 and T30.

NK-02-40-02 drylin® linear guide system

"For the linear guide system drylin® NK-02-40-02 by igus® GmbH, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2μm, 0.3μm, 0.5μm, and 5μm with motion speed of v =1m/s, to clearly derive suitability for cleanrooms classified as ISO Class 6 according to DIN EN ISO 14644-1."
The measurement results of the ESD compatibility according to SEMI E78-0998 show that the linear guide system drylin® NK-02-40-02 can be classified as "level 1" (highest rank). Fraunhofer IPA Report No.: IG 0308- 295 73

drylin® TK-01-30-01 linear guide system

"For the linear guide system drylin® TK-01-30-01 by igus® GmbH, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2μm, 0.3μm, 0.5μm and 5μm with motion speed of v = 0.1m/s, to clearly derive suitability for cleanrooms classified as ISO Class 3 according to DIN EN ISO 14644-1."

drylin® TK-01-25-02 linear guide system

"For the linear guide system drylin® TK-01-25-02 by igus® GmbH, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2μm, 0.3μm, 0.5μm and 5μm with motion speed of v = 1m/s, to clearly derive suitability for cleanrooms classified as ISO Class 5 according to DIN EN ISO 14644-1."
The measurement results of the ESD compatibility according to SEMI E78-0998 show that the linear guide system drylin® TK-01-25-02 can be classified as "level 1" (highest rank).

WK-10-40-15-01 drylin® linear guide system

"For the linear guide system drylin® WK-10-40-15-01 by igus® GmbH, it is possible, on the calculations of the likelihood of violation of threshold values of the detection sizes 0.2μm, 0.3μm, 0.5μm and 5μm with motion speed of v = 1m/s, to clearly derive suitability for cleanrooms classified as ISO Class 6 according to DIN EN ISO 14644-1."
The measurement results of the ESD compatibility according to SEMI E78-0998 show that the linear guide system drylin® WK-10-40-15-01 can be classified as "level 1" (highest rank). See Fraunhofer IPA Report No.: IG 0308-295 74