Vyberte místo pro doručení

Výběr stránky země/oblasti může mít vliv na různé faktory, jako jsou cena, možnosti dopravy a dostupnost produktu.
Moje kontaktní osoba
Hennlich s.r.o.

Račianska 188

831 53 Bratislava 34

+421 2 50202506
+421 2 50202520
Hennlich s.r.o.

Na Bystričku 16

036 01 Martin

SK(CS)

Gears & Racks online shop

In our gear shop you have the possibility to buy different plastic gears.
The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
Do you have questions about our gears or would you like technical support? We will be happy to advise you without obligation. Contact us here.

Kategorie
Filtr
Size

Pocet výrobku: 19

Novinka

iguform S270 gears, mm

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

8 different modules available. Choose from over 300 dimensions.

Calculate service life now

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 1,78 EUR/ks
318 položek, z toho připraveno k přepravě:
314 in 48 hodin
'Na stránku výrobku
Novinka

iguform S270 gear racks, mm

  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise

Matching modules available for the gear product range.

You will find information on the length in the product description.
od 4,73 EUR/ks
8 položek, z toho připraveno k přepravě:
7 in 48 hodin
'Na stránku výrobku
Novinka

igutek P360 gears, mm

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

8 different modules available. Choose from over 300 dimensions.

Calculate service life now

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 2,06 EUR/ks
317 položek, z toho připraveno k přepravě:
313 in 48 hodin
'Na stránku výrobku
Novinka

igutek P360 gear racks, mm

  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads

Matching modules available for the gear product range.

You will find information on the length in the product description.
od 5,46 EUR/ks
8 položek, z toho připraveno k přepravě:
8 in 48 hodin
'Na stránku výrobku

xirodur® B180, gear, mm

  • ​​​​​​Very low coefficients of friction
  • Wear-resistant material for continuous operation
  • Vibration-dampening
  • Available in 3 hub designs

Matching gear racks available here
od 8,87 EUR/ks
9 položek, z toho připraveno k přepravě:
6 in 24-48 hodin
'Na stránku výrobku

iguform S270 bevel gears - ratio 1:1

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 2,06 EUR/ks
8 položek, z toho připraveno k přepravě:
8 in 48 hodin
'Na stránku výrobku

iglidur® F, gear, mm

  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs
na požádání
'Na stránku výrobku

iglidur® A500 gear, mm

  • The endurance runner at higher temperatures in the food sector
  • Compliant with Regulation (EU) No. 10/2011
  • FDA compliant
  • Temperature resistant from -100°C to +250°C
na požádání
'Na stránku výrobku

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 2,24 EUR/ks
8 položek, z toho připraveno k přepravě:
8 in 48 hodin
'Na stránku výrobku

iguform S270 bevel gears - ratio 1:1,5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 6,84 EUR/ks
2 položek, z toho připraveno k přepravě:
2 in 48 hodin
'Na stránku výrobku

iguform S270 bevel gears - ratio 1:2

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 4,82 EUR/ks
10 položek, z toho připraveno k přepravě:
10 in 48 hodin
'Na stránku výrobku

iguform S270 bevel gears - ratio 1:3

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 3,80 EUR/ks
8 položek, z toho připraveno k přepravě:
8 in 48 hodin
'Na stránku výrobku

iguform S270 bevel gears - ratio 1:4

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 3,16 EUR/ks
6 položek, z toho připraveno k přepravě:
6 in 48 hodin
'Na stránku výrobku

iguform S270 bevel gears - ratio 1:5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 3,16 EUR/ks
2 položek, z toho připraveno k přepravě:
2 in 48 hodin
'Na stránku výrobku

igutek P360 bevel gears - ratio 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.

Notes on tolerance specifications can be found in the product description.
Information on other dimensions can be found under Technical Data.
od 5,74 EUR/ks
10 položek, z toho připraveno k přepravě:
10 in 48 hodin
'Na stránku výrobku
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.