Cylindrical bushings

Plain bearings - maintenance- and lubrication-free
Sleeve bearings made from high performance plastics provide mechanical stability with the lowest coefficients of friction without additional lubrication. Whether in dirt and dust, in the cleanroom laboratory or under water.
 

Produkty

Filtr

Základní požadavky
Requirements
Material

Počet výrobků: 54

iglidur® H2, sleeve bearing, mm
  • Low-cost, for high temperatures
  • Can be used underwater
  • Resistant to chemicals
  • For high temperatures

na požádání

'Na stránku výrobku
iglidur® A290, sleeve bearing, mm
  • Robust, with high abrasion resistance
  • If low noise level is required

na požádání

'Na stránku výrobku
iglidur® HSD350, sleeve bearing, mm
  • continuous use up to +180°C
  • High media resistance
  • Corrosion-free
  • For wet environments

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® J260, sleeve bearing, mm
  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglidur® J

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® AB, sleeve bearing, mm
  • According to ISO 22 196:2011
  • Antibacterial
  • Universal use
  • Good liquid media resistance

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® P, sleeve bearing, mm
  • The cost-effective outdoor allrounder - No moisture expansion even with high ambient humidity
  • Low water absorption
  • Low wear rates
  • High load capacity

na požádání

'Na stránku výrobku
iglidur® R, sleeve bearing, mm
  • Low-cost material, low wear
  • Good abrasion resistance
  • Low coefficients of friction in dry operation
  • Cost-effective

na požádání

'Na stránku výrobku
iglidur® Z, sleeve bearing, mm
  • Extremely long service life under extreme conditions, resistant to wear and impact even at high loads and temperatures
  • Excellent wear resistance especially with high loads
  • High thermal resistance
  • For extreme loads

od 3,71 USD / Pc.

'Na stránku výrobku
iglidur® H370, sleeve bearing, mm
  • Extremely long service life under water and high media-resistance
  • Wear-resistant – especially under water
  • High temperature resistance –40 °C to +200 °C
  • High chemical resistance

od 19,38 USD / Pc.

'Na stránku výrobku
iglidur® C, sleeve bearing, mm
Free from PTFE and silicone, good abrasion resistance
  • Dry operation
  • Good abrasion resistance
  • Lubrication and maintenance-free

na požádání

'Na stránku výrobku
iglidur® J4, sleeve bearing, mm
Wear-resistant and low priced
  • Lubrication and maintenance-free
  • Cost-effective material for mass production
  • Low coefficients of friction

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® A181, sleeve bearing, mm
  • The universal bearing for contact with food
  • Compliant with EC directive 10/2011 EC
  • FDA-compliant
  • Universal use

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® V400, sleeve bearing, mm
  • For soft shafts, up to +200 °C
  • Excellent wear resistance with soft shaft materials and for temperatures up to +200 °C
  • Good resistance to chemicals
  • High elasticity

na požádání

'Na stránku výrobku
iglidur® G1, sleeve bearing, mm
  • Two times longer service life at high loads
  • Up to 4 times lower wear at low loads
  • Long-term service temperature up to +180°C
  • Pressfit up to +120°C (iglidur® G: up to +80°C)
  • Moisture absorption reduced by 50%

na požádání

K dispozici na požádání
'Na stránku výrobku
iglidur® J, sleeve bearing, mm
  • The versatile endurance runner, highly resistant to wear on (nearly) all shafts with very low coefficients of friction
  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening

od 1,14 USD / Pc.

'Na stránku výrobku